Corrosion-Resistant Electric Industrial Diaphragm Pump

Corrosion-Resistant Electric Industrial Diaphragm Pump

Electric Industrial Diaphragm Pump Introduction

Corrosive Electric-driven diaphragm pump is a pump specially used to transport corrosive media, suitable for transporting corrosive media such as acids, alkalis, salts, solvents, and organic chemicals in various chemical, pharmaceutical, electroplating, and environmental protection industries. occasion. The pump is manufactured with corrosive materials such as Polypropylene (PP), Fluoroplastic (PTFE), etc. to ensure its excellent corrosion resistance. The working principle of the pump is to suck the medium from the inlet and transport it to the outlet through the movement of the diaphragm, which has the advantages of self-priming, self-draining, and not easy to leak. Corrosive electric industrial diaphragm Pumps are usually composed of motors, reducers, diaphragms, Valve bodies, ball valves and other components. They have the characteristics of corrosion resistance, high efficiency, safety, energy saving, and easy maintenance.

Electric Industrial Diaphragm Pump Scope Of Application

• Crude oil, petroleum products and other liquid media
• Various acids, alkalis, salts and other chemicals
• Acid-base solution used in electroplating, surface treatment and other processes
• Solvents, ketones, esters and other organic chemicals

Electric Industrial Diaphragm Pump Main Features 

1. No irrigation and diversion is required, and the automatic capacity can reach more than 7 meters.

2. Good passing performance, particles and mud with a diameter of less than 10 mm can pass through without difficulty.

3. Since the Motor-driven diaphragm pump separates the conveyed medium from the transmission mechanical parts, the medium will not leak out. And the pump itself has no shaft seal, so the service life is greatly extended. According to different media, the diaphragm is divided into neoprene, fluorine rubber, nitrile rubber, etc., which can meet the requirements of different users.

4. The medium flowing part of the pump body can be divided into cast iron, stainless steel and rubber lining according to user requirements. The motor is divided into two types: ordinary type and explosion-proof type (B3b).

Electric Industrial Diaphragm Pump Precautions For Use

1. It is strictly forbidden to install valves at the pump outlet, if it is necessary to install valves; a safety valve should be installed at the outlet, and the working pressure should not exceed 4 kg to avoid losses.
2. Refuel in time to keep the lubrication system running normally.
3. The ambient temperature of the pump during use should be less than 40°C, and the temperature of the motor should not exceed 75°C.
4. The conveyed medium and its temperature should be within the allowable range of the pump material.
5. When the conveying liquid is a medium that is prone to precipitation and crystallization, it should be cleaned and drained in time after use to avoid damage when it is restarted. 

Electric Industrial Diaphragm Pump Performance Parameter Table

Huatao Supply The Spare Parts For All Kinds of Pump