Flat Seat Soft Seal Gate Valve
Product Description
The general gate valve used on the market for a long time has a common phenomenon of water leakage and rust.Our soft-seal gate valve overcomes the defects of general gate valve such as poor sealing, fatigue, and easy rust. It is a replacement product of traditional gate valve. It uses the elastic gate to produce a small amount of deformation compensation to achieve a good sealing effect.
It can be widely used as a regulating and intercepting device on fluid pipelines such as tap water, sewage, construction, food, electric power, medicine, metallurgy, textile, energy systems, etc.
Features
1. Flat-bottomed seat
Not easy to cause debris accumulation, so that the fluid is unobstructed
2. Overall
Valve plate is made of high-quality rubber for overall inner and outer
3. Corrosion
Valve body is painted with epoxy resin
4. Three "O" type sealing ring
Reduce frictional resistance, greatly reduce water leakage, and can replace the sealing ring without stopping water construction
5. Light Weight
Made of ductile cast iron, the weight is reduced by 20-30% compared with the traditional gate valve.
Product Specification
| NO | Product name
| Material
|
| 1 | Valve body
| Ductile iron, epoxy spray
|
| 2 | Wedge disc
| Ductile iron, integral EPDM coating
|
| 3 | Stem
| 2Gr13,45# chrome plated steel, SS304, SS316, SS410 valve stem
|
| 4 | Hand wheel
| Cast iron or iron plate
|
| 5 | Wedge nut
| Steel or brass
|
Contact Now
