Plastic HDPE PE Or PP Uniaxial Geogrid

Plastic HDPE Uniaxial Geogrid Description
HDPE Geogrid is high-density polyethylene (HDPE) as raw material, plastics extrusion sheet, punching, heating, and stretching. By stretching making the original scattered distribution chain-shaped molecule reorientation and linearly status, the grille sufficiently improved tensile strength and rigidity. HDPE Uniaxial Geogrid lay in the soil, and by engaging the interlocking effect and soil grid mesh between, constitute an efficient stress transfer mechanism, so that local load quickly and effectively spread to large areas of soil to go, thus helping to lower local failure stress, the purpose of improving the life of the project.

HDPE Uniaxial Geogrid Specification
1. HDPE Uniaxial Geogrid  Strength:  30KN/M --  300KN/M
2. HDPE Uniaxial Geogrid Width: 1m to 3m
3. HDPE Uniaxial Geogrid Length: As request
4. HDPE Uniaxial Geogrid Loading: 20ft container, 40ft high container  

HDPE Uniaxial Geogrid Advantages  
HDPE Uniaxial Geogrid advantage is sustained in the long-term load deformation (creep) the tendency of small, creep-strength geogrid is much better than other materials, to improve the life of an important project effect.

Plastic Geogrids Application
HDPE Uniaxial Geogrid is suitable for the construction of roads, railways and rivers, lakes and the coast reinforced retaining walls, dams, bridges, steep slopes, and Geocell and other projects. Its role is to improve the bearing capacity of retaining walls or dams, extend the life and reduce the footprint, shorten the construction period, reduce costs, and reduce maintenance costs.

HDPE Uniaxial Geogrid's main use is as follows:
1. Enhance roadbed, which can effectively spread load distribution, improve the stability and foundation bearing capacity and prolong life;
2. Can withstand greater alternating load;
3. Prevent roadbed subgrade material loss caused by deformation and cracking;
4. Make the filling self-supporting capacity of the retaining wall after the increase, reduce earth pressure retaining wall, save costs, extend the life, and reduce maintenance costs;
5. The combination of spraying anchor construction method of concrete slope maintenance carried out, not only can save 30% -50% of the investment, but also shorten the construction period by more than doubled;
6. Add geogrid in highway roadbed and surface layer, it is possible to reduce deflection and reduce rutting, cracks delayed time 3-9 times the structure thickness can be reduced by 36%;
7. Applicable to all kinds of soil, with no off-site coverage, while saving time and labor;
8. simple and quick construction, can greatly reduce the construction cost.