Ring-Shaped Canvas Pasting Belt For Battery Industry

Ring-Shaped Canvas Pasting Belt For Battery Industry

Brief Introduction

Our company's Cotton Pasting Belt adopts the combination of traditional technology and imported technology and is developed by one-time molding and the specific production requirements of the pasting machine. The life of the pasting belt is twice that of the traditional pasting belt and is almost at the same level as Italy's belts. The weight deviation of the pasted plate is stable. It has strong water absorption, easy to degrease, has no elongation (using the tensile framework), no static electricity, and has high-cost performance. When replacing the coating belt, there is no requirement for any direction, and it can be used normally after being installed on the machine.

Product Details

Product Name ----------------------------- Ring-Shaped Canvas Pasting Belt For Battery Industry
Color --------------------------------------- Light Yellow
Material ------------------------------------100% Cotton
Application -------------------------------- Energy storage battery plate paste
Available size ------------------------------ As your demands
Applied environment ---------------------- Wear resistance, corrosion resistance, slip resistance, acid-proof, alkali resistance

Advantage Of Battery Pasting Belt

Our battery pasting belt`s surface with high abrasion resistance

Our pasting belt is truly endless surface, no joint

Our battery pasting belts using tensile skeleton,there is no deformation, elongation less than 2%

Our pasting belt apply the lead paste is very uniform,the gram weight deviation will be controlled within 3-4g

Application of Endless Pasting Belt

This kind of battery pasting belt is mainly used various of pasting machine, such as MAC,Golden Sunlight, etc. We could produce the specific size as your demands. We make sure that the belt we made will be suitable for your Battery Plate Pasting Machine. The application show of the pasting belt for your reference:

Use caution

First, belt storage

Store the battery pasting belt in a cool and dry environment. The rational environment is 20C° temperature and 50% humidity. Do not place the belt under direct sunlight, high temperature (low), or excessive humidity. Otherwise, it will affect the belt. Surface material properties.

Second, belt installation

Before installing the battery pasting belt, remove any oil, cotton, and other foreign materials on the surface of the belt and the roller and the roller to prevent the belt from walking abnormally. Belts with joints are different depending on the application during installation. Please pay attention to the belt running direction.

Third, install & Adjustment

The deviation of the battery pasting belt will cause the damage of the conveyor belt, which can be corrected by adjusting the roller, etc. The belt will have a little extension after installation.

In a state with a certain degree of tension, let the belt rotate for 1-2 weeks so that the overall tension of the belt is uniform. At this time, the tension pulley is properly fixed. After 24 hours of operation, the tensioning wheel is adjusted again. At this time, the intermediate material of the belt has been fully stretched and the belt will no longer extend.

Fourth, belt maintenance

Keep the battery pasting belt belt and roller clean during use. Never use stupid chemicals to wipe the belt.