Endless Pasting Belt For Battery Production
Brief Introduction
This is a specially designed single-sided coated belt, the production process is mature, the pasting belt size is 6x330x2540mm, the material is cotton fiber + synthetic fiber, and the appearance is similar to the Italian pasting belt, suitable for customers who have high requirements for the Grid.
Seamless Pasting Belt Details
Product Name ----------------------- Endless Pasting Belt For Battery Production
Color --------------------------------- White
Material ------------------------------50% cotton + 50% Synthetic
Application -------------------------- Battery pasting machine
Available size ------------------------ 6x330x2540(The size can be adjusted slightly)
Applied environment ---------------- Wear resistance, corrosion resistance, slip resistance, acid-proof, alkali resistance
Advantage of our Synthetic Pasting Belt
• "Non woven" structure
• Constant thickness
• Top and bottom of the belt with equal surface
• Longer duration of the belt
• Surface with high abrasion resistance
• Truly endless surface, with the same strength in all the belt`s sections and no weak points
Application of our Battery Grid Pasting Conveyor Belt
This kind of Battery Pasting Belt is mainly used various of Pasting Machine, such as MAC,Golden Sunlight, etc. We could produce the specific size as your demands. We make sure that the belt we made will be suitable for your Battery Plate Pasting Machine. The application show of the pasting belt for your reference:
Daily maintenance and instructions
1. It should be used within four months after received
2. It should be stored in a low-temperature dry environment,to avoid direct sunlight
3. It should be check if there have any sundries on the both side of the belt,in order to avoid scratching the belts
4. It should be as wet as possible when use the belt
5. It should be washed with a clean surface after half-working day
Note:on the basis of the working life,good maintenance can increase the working life