Battery Industry Conveyor Belt Seamless Pasting Belt
Brief Introduction
This Endless Pasting Belt is produced from 100% synthetic fiber using a needling process. This Battery Pasting Belt is a truly seamless strip with a smoother surface and solves your concerns about coated strips. This type of Synthetic Pasting Belt has a tensile framework, which is soft and suitable, and it has a stable friction coefficient and tensile strength. High strength, low elongation, strong water absorption, high plate-type transmission efficiency, long service life, soft and hard paste are all applicable, and it is the preferred choice for battery industrial plate smear production.
Our Synthetic Pasting Belt Specification
Type | Apparent Condition | Feature | Thickness(mm) | Width(mm) | The inner diameter | Tensile strength(N/mm) |
HBZ | Seamless,surface texture rough | strong water absorption,acid-resisting | 6-12 | 300-860 | As your demands | 360-720 |
HFZ | smooth | strong water absorption,acid-resisting |
HMT | Soft nap | strong water absorption,acid-resisting | 5-10 |
Advantage of our Synthetic Pasting Belt
• "Non woven" structure for our pasting belt
• Constant thickness for our pasting belt
• Top and bottom of the belt with equal surface for our pasting belt
• Longer duration of the belt for our pasting belt
• Surface with high abrasion resistance
• Truly endless surface, with the same strength in all the belt`s sections and no weak points
Application of our Battery Grid Pasting Conveyor Belt
In the production process of the battery, Battery Pasting Belt is am very important part of the process. There will be needed a Conveyor belt to carry the plates to the position of the paste, that conveyor belt is called Battery Pasting Belt.
Packing&Delivery
Packing: woven bag/plastic bag
Delivery: by ari/by sea/by courier
Daily maintenance and instructions
1. Seamless Pasting Belt should be used within four months after received
2. Seamless Pasting Belt should be stored in a low-temperature dry environment,to avoid direct sunlight
3. Seamless Pasting Belt should be check if there have any sundries on the both side of the belt,in order to avoid scratching the belts
4. Seamless Pasting Belt should be as wet as possible when use the belt
5. Seamless Pasting Belt should be washed with a Clean surface after half-working day
Note:on the basis of the working life,good maintenance can increase the working life
Design Your Battery Pasting Belt
Material:100% cotton/Synthetic Fiber ------------------------------------- Your request material:__________
Thickness:5-10mm ----------------------------------------------------------- Your request width:____________
Width and length can be customed ------------------------------------- --- Your request:_________________
Your commonly used Pasting Machine(Improve the applicability of the belt):________________