Paints Pressure Filter

Description Of Paints Pressure Filter

The Pulp & Paper industries are one of the largest industries in the world. The process of paper making includes preparation of raw materials,

fiber separation, bleaching process, papermaking process, etc. The best quality of paper can be defined by the best finish, coating, smoothness

and thickness of the paper. Raw materials used shall be pure and free from impurities to get paper of higher quality. To this end, impurities must

be removed from pulp and paper making water in the paper making process. HUATAO provides you with a wide range of pulp &paper filtration solutions

including starch slurry filtration solutions, Dosing chemical filtration, Coating Slurry Filtration and Water Recycling/White Water Filtration.

Working Principle Of Paints Pressure Filter

The raw liquid enters the filter through the inlet. During the filtration process, the impurity is accumulated on the stainless steel wedge wire filter element, and the inner impurity is gradually accumulated.

1. Automatic cleaning: When filtration working time reaches the set point, the electronic control system signal will work. The reducer begins to work;

  the reducer drives the metal scraper to remove the particles on the filter element external surface. When cleaning time reaches the set point,

  the drain valve is opened to blow down.

2. Manual cleaning: The recuder drives scrapers to remove the particles on the filter element external surface continuously.

  When the time reaches the set point, the drain valve opens and starts to blow down.

3. Pressure difference cleaning (optional): When pressure difference between the inlet and the outlet reaches the set point,

  The reducer drives the metal scraper to removes impurities on the filter element. When the cleaning time reaches the set point, cylinder stops working.